User`s manual

5
Bluetooth
To use a Bluetooth enabled cell phone with your DS6521/DS6522, you must rst
pair and connect your Bluetooth cell phone(s) with the telephone base. All DS6521/
DS6522 handsets can be used to make or answer calls on the cell line.
Bluetooth wireless technology operates within a short range (a maximum of
approximately 30 feet). When you pair a Bluetooth cell phone to the telephone
base, make sure your Bluetooth cell phone is close to the telephone base to
maintain sufcient signal strength.
Pair and connect your rst Bluetooth cell phone
Press and hold 1/ 2 on the telephone base for about four seconds. You
hear two beeps and the 1/ 2 light blinks.
Turn on the Bluetooth feature of your cell phone. Once your cell phone nds
your VTech phone (VTech DS6521/DS6522), press the appropriate key on your
cell phone to continue the pairing process.
Download directory
Press MENU when the phone is not in use.
Scroll to Bluetooth then press SELECT.
Scroll to Download dir then press SELECT.
Scroll to select the desired cell phone, then press SELECT.
Using the handset menu
Press MENU when the phone is not in use.
Press or until the screen displays the desired feature menu.
Press SELECT to enter that menu.
To return to the previous menu, press CANCEL.
To return to idle mode, press and hold CANCEL.
Telephone settings
Default settings are indicated by asterisks(*).
Settings menu Description Options
LCD language Set the screen display language. English*
Français
Español
Voicemail # Set the voicemail number for speed dial. Voicemail #
_
Clr voicemail Turn off the voicemail indicators (see the
note below).
Reset VM Icon?
Key tone Turn an audible beep on or off whenever a key
is pressed.
Key tone:On*
Key tone:Off
Home area code Enter your home area code if you dial only
seven digits for local calls.
Home area code
_ _ _
Dial mode Set the telephone to be touch-tone or
pulse dialing.
Touch-tone*
Pulse
Use the Clr voicemail feature when the telephone indicates there is new voicemail
but there is none. For example, when you have accessed your voicemail while away
from home. The Clr voicemail feature only turns off the indicators; it does not delete
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set. Refer to
Telephone settings in the online Complete user’s manual for detailed instructions
on setting all telephone features.
Ringer volume (handset)
You can adjust the ringer volume level, or turn the ringer off.
Press MENU when the handset is not in use.
Scroll to Ringers then press SELECT.
Scroll to choose Home volume or Cell volume, then press SELECT.
Press or to adjust the volume, then press SELECT to save.
If the handset ringer volume is set to off, that handset is silenced for all incoming
calls except paging tone.
1.
2.
1.
2.
3.
4.
1.
2.
3.
•
•
•
1.
2.
3.
4.