User`s manual

10
Message playback at the telephone base
Press /PLAY when the phone is not in use.
Options during playback:
Press q/VOL or VOL/p to adjust the speaker volume.
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message currently playing. Press /REPEAT
twice to listen to the previous message.
Press X/DELETE to delete the playing message. The system advances to the
next message.
Press /STOP to stop.
Delete all messages at the telephone base
Press X/DELETE twice when the phone is not in use.
Call intercept
If you want to talk to the person whose message is being recorded, press /HOME
or on the handset.
Access the answering system remotely
Dial your telephone number from any touch-tone telephone.
When the system plays your announcement, enter the two-digit remote code.
The preset code is 19.
Enter one of the following remote commands.
Command Description
1 Play all messages.
2 Play new messages.
3 Delete a message (during playback).
33 Delete all old messages.
4 Repeat the current message (during playback).
5 Stop.
*5 Hear a list of remote commands.
6 Skip to the next message (during playback).
*7 Record an announcement.
8 End the call.
0 Turn the answering system on or off.
Hang up or press 8 to end the call.
Add and register a handset
The handsets provided with your telephone system are already registered. Each
handset is assigned a number that displays on the handset. Additional handsets
registered to the telephone system are assigned numbers in the sequential order.
This telephone system accommodates up to ve handsets.
You can add new handsets (DS6501/DS6501-12, purchased separately) to your
telephone system. Each handset must be registered with the telephone base
before use. When rst purchased and properly charged, each expansion handset
shows To register HS... and ...see manual alternately. Charge the handset before
registering it to the telephone base.
To register a handset:
Place the new/non-registered handset in the telephone base.
Wait for about 10 seconds. The handset shows Registering... then Registered
and you hear a beep when the registration process completes. The registration
process takes about 90 seconds to complete.
•
•
•
•
•
1.
2.
3.
4.
1.
2.
Do not place the handset
in the charger.