Owner's manual
Table Of Contents
- Parts checklist
- Telephone layout
- Analog corded lobby - A1100
- Analog corded 1-line - A1210
- Analog corded 1-line - CL-A1110
- Analog corded 2-line - A1220
- Analog corded trimstyle - A1310
- Analog corded trimstyle - A1311
- Analog cordless 1-line - A1410
- Analog cordless 2-line - A1420
- Analog cordless charging base - C3000
- Analog cordless 1-line accessory handset - C3100
- Analog cordless 2-line accessory handset - C3200
- Installation
- Telephone settings
- Telephone operation
- Appendix
- Index
50
Technical specications
Analog cordless 1-line/2-line - A1410/A1420
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Telephone base: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary according to
environmental conditions at the time of use.
Power requirements Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @600mA
Message waiting signal Steady/periodic high voltage pulse, periodic low voltage pulse, reverse polarity, FSK, Siemens
and/or Panasonic
Speed Dial memory Telephone base: up to 10 memory locations; up to 32 digits
Size Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Appendix
Analog corded lobby - A1100
Power requirement Line powered 24V or 48V
Size Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Analog corded 1-line/2-line - A1210/CL-A1110/A1220
Power requirement Line powered 24V or 48V
Message waiting signal Steady/periodic high voltage pulse or periodic low voltage pulse
Speed Dial memory Telephone base: up to 10 memory locations; up to 16 digits
Size Telephone base: 8.66 x 6.02 x 2.56 in (220 x 153 x 65 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Analog corded trimstyle - A1310
Power requirement Line powered 24V or 48V
Message waiting signal Steady/periodic high voltage pulse or periodic low voltage pulse
Size Telephone base: 8.54 x 3.11 x 3.23 in (217 x 79 x 82 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)
Analog corded trimstyle - A1311
Power requirement Line powered 24V or 48V
Message waiting signal Steady/periodic high voltage pulse or periodic low voltage pulse
Size Telephone base: 8.72 x 3.02 x 1.84 in (221.6 x 76.8 x 46.85 mm)
Corded handset: 2.23 x 2.15 (0.99) x 8.24 in (56.74 x 54.56 (25.26) x 209.40 mm)