System information

Getting Started 43
AT&T SB67010 Gateway, SB67030 Deskset System Administrator’s Guide
Fwd/Trans to line
The System Administrator may enable or disable the ability to forward or transfer a call to an external line because these features
use two of your telephone lines. This function is enabled by default. Disabling this function prohibits the user from sending a call
to an external line via the Gateway.
 To toggle the Forward/Transfer to an external line:
Figure 41. Fwd/Trans to Line
1. Perform the “To display the Admin Settings menu:” procedure on page 37.
2. Press 2 on the dial pad to display the Fwd/Trans to line screen shown in Figure 41,
with the current setting in the top field.
3. Press the or navigation key to toggle the setting from Enabled to Disabled,
as shown in Figure 42.
4. Press to accept the changes and return to the Admin Settings screen
shown in Figure 33 on page 38.
Figure 42. Toggle Fwd/Trans