Operating instructions
11
Enter Base ID Code
1. After charging the Handset,
remove it from its Charge
Cradle, the screen will display:
2. Press NEW, then enter the 15
digit Base Unit ID code, located
on the underside of the Base
Unit.
3. Press OK. The Handset will
display: PLEASE WAIT!!
4. Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
If the Handset displays: BASE
BUSY TRY LATER, this
indicates that the system is in
use. Wait until the Base Unit
is in the idle (on hook) mode,
and repeat step 2 to 4.
NOTE: Occasionally, it may take
longer than 15 seconds for the
Handset to confirm registration to
the Base Unit. This is normal.
Congratulations! You can now enjoy
the benefits of your multi-Handset
system.
Registration and Operation
Getting Started