User`s manual

Plug the power adapter into the baby unit, plug the other end of the

power adapter into the wall outlet. Bundle the power cord neatly with

the self-adhesive strap. Make sure to keep the power adapter cord

away from children’s reach.

Option 2: Use this method so that you can relocate the baby unit with

the wall mount easily.

Note

Check for reception strength and camera angle before drilling the holes.

Place the wall mount on a wall and then use a pencil to mark the top

and the bottom holes as shown. Then remove the wall mount and

drill two holes in the wall. Check for reception strength and camera

angle before drilling the holes.

ON/OFF