User`s manual

16
4. Replace the battery cover and tighten the screw to secure the battery cover.
Important: While replacing the batteries, the CR2032 backup battery must be kept
in AlphaBert’s Magic ReadPort
™
, if not, you will lose all saved
information.
Backup Battery
AlphaBert’s Magic ReadPort
™
comes with a backup battery already installed. Before
using AlphaBert’s Magic ReadPort
™
remove the protective strip from the backup
battery by pulling on the plastic tab. To avoid damage to AlphaBert’s Magic
ReadPort
™
from leaky batteries, replace the backup battery at least once a year.
To replace the backup battery:
1. Make sure AlphaBert’s Magic ReadPort
™
is OFF.
2. Use a screwdriver to loosen the screw of the battery
cover.
3. Insert 1 CR2032 size battery as illustrated.
4. Close the battery cover and tighten the screw to secure
the battery cover.
Important: While replacing the battery, the 3 “AA” batteries must be kept in
AlphaBert’s Magic ReadPort
™
. If not, you will lose all saved information.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the learning toy when it will not be
used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to be
used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE BATTERIES.
BATTERY NOTICE