User`s manual

Thomas, ET, Juliet Classic, Juliet Pro, Juliet Pro 60 35
WARRANTY, SUPPORT & SERVICE
Enabling Technologies Company warrants all parts and workmanship of the
embosser to be free of defects for a period of one year (365 days) from date
of delivery. This warranty is extended only to the original purchaser who
must return such defective part(s) to Enabling Technologies Company
immediately upon customer's discovery of the defect in question. Return
shipment of such defective part(s) must be pre-paid by customer.
This warranty does not extend to defects resulting from improper use or
unauthorized service by purchaser. Also, the warranty is invalid if any of the
instructions accompanying the product are not carefully followed.
This limited warranty is made in lieu of all other warranties, expressed or
implied, and is limited to the repair or replacement of the product. No
warranty, expressed or implied, is extended concerning the completeness,
correctness, or suitability of the Enabling Technologies Company equipment
for any particular application. There are no warranties which extend beyond
those expressly stated herein.
Enabling Technologies Company offers an Extended Warranty Program. For
further details, contact:
Enabling Technologies Company
Service Contract Administrator
1601 Northeast Braille Place
Jensen Beach, Florida 34957
For support and service within the United States, contact our Customer
Support Group toll free at [phone] or [phone]. For customers
outside the United States contact your local Enabling Technologies
distributor. They may be able to resolve your problem quickly on the
phone. You may also contact us via email at: [e-mail].
If your problem cannot be resolved on the phone, request a Return
Authorization (RA) number from the Customer Support Group. You MUST have
an RA number before you can return your embosser to us for service. This
number is necessary for us to schedule service time for your embosser.
After you obtain a Return Authorization number from Customer Support,
pack your embosser in the original carton and packing material. If the
original carton was discarded, use a container that provides at least three