User`s manual

Thomas, ET, Juliet Classic, Juliet Pro, Juliet Pro 60 29
QUICK REFERENCE GUIDE
Keys
OL On-Line/Off-Line (toggle)
LF Line-Feed
FF Form-Feed
V View (toggle)
0-9 Numeric entry
Decimal Numeric entry
E Enter
Tones
Various sounds indicate the status of the embosser. Try out the tones (it
won't hurt anything) by typing the sequences below on the embosser's keypad
while off-line.
1.0E (Thomas & Juliet) Romeo & Juliet tune--Power on self test
OK
1.0E (ET) Eight-note tune--Power on self test OK
1.1E Chopin Funeral Dirge--Power on self test failed
1.2E 2 short beeps--OK
1.3E Buzz--Invalid sequence
1.4E 4 long beeps--Overrun error (serial data)
1.5E Low to high--On-line
1.6E High to low--Off-line
1.7E 1 short beep--Console bell
1.8E Series of low to high--Paper out
1.9E Series of low beeps--Exit tone
1.10E Beethoven's 5th--Multi-Copy buffer full
Top-of-Form Reset
Do this after you change menu settings or add paper.
OL Takes the embosser off-line
2E Set top-of-form. Embosser resets automatically