User`s manual

Thomas, ET, Juliet Classic, Juliet Pro, Juliet Pro 60 14
If you already have a clear idea that something else should be changed in the
embosser's serial port settings (baud rate, handshaking, etc.), the Quick
Reference Guide in the back of this manual has a list of the menu items you can
adjust for the serial port.
Try sending a short file using whatever copy, transmit or print command your
computer or software requires to test the connection. For the IBM PC, from the
DOS prompt, the command to send the file to the first serial port is:
copy mydoc.brf com1: [Return]
Assuming you have connected the computer and the embosser as described
above, and fully installed your translation software, you can expect to get
Braille out immediately. Please proceed to the section titled Installing Drivers
in Microsoft Windows.