User`s manual

Thomas, ET, Juliet Classic, Juliet Pro, Juliet Pro 60 12
For example: Should you change the right margin? You think you set it for 40
characters wide yesterday but you're not sure. Enter on the embosser's keypad:
OL Takes the embosser off-line
0.1E Enter Menu 1
V.14E ET Speaks will read the current right margin setting, because
14 is the parameter assigned to the right margin
Now you know if you have to change the margin setting--or not.
1.1E Exit the menu
How to Change Menu Settings
Because each menu contains over thirty different settings, sooner or later you'll
want to make some changes when you need to use different paper, Braille
formats or port connections.
For example, let's say you're using Menu 1 because you have an IBM
PC-compatible. You want to adjust the right margin for narrower Braille paper.
Enter the following on the embosser's keypad:
OL Takes the embosser off-line
0.1E Enter Menu 1
14.32E Set the right margin at 32 Braille characters
1.1E Return on-line and use this menu as the current configuration
A complete list of the thirty-plus individual menu items is also in the Quick
Reference Guide in the back of this manual.
Restoring Factory Settings
If you change too many menu parameters to keep track of, or if you're not the
only person to use the embosser, you might want to reset the embosser back to
the original factory settings. Although you will lose all changes you've made to
the menus, you'll also be starting fresh.
OL Takes the embosser off-line
0.0E Enter the Service Menu
95E Restore the factory default settings
1E Reset the embosser