User`s guide

Page
36
of
48
Ver
2.
3
• Set your passwordand press applyas shown below. The password can be any 4 to
8digits
When you call into your telephone line you will hear a beep. Enter the pin code followed
by the * button and then enter the Skype speed dial (e.g. 77) or the SkypeOut telephone
number (e.g. 00 + country code + telephone number) followed by the * button.
In orderperform tollbypass on an incoming Skype call,enable Toll Bypass in the VoIP
to Phone Line section.When you Skype into theSkylink Proadaptor, you will hear a
beep. Enter the pin code followed by the * button and then enter the telephone number
you want to dial on the PSTN line followed by the * key.
As you can see in the screenshot above, when forwarding is enabled, the driver will
disable the computer’s ability to go tostandby mode. When the computer tries to go into
a standby mode, you will see the following popup:
If the computer goes to sleep, then toll bypass will not work. To turn this feature off,
uncheck the “Disable Standby/Hibernate” check box.