User`s guide

Page
32
of
48
Ver
2.
3
• Then select the telephone that should be dialed on the telephone lineand press the
Apply and/or Exit buttonas shown below.Enter the telephone exactly as you
would dial it if you were to pick up a telephone directly connected to the phone
line.
If you areon a PBX, you may need to press a digit to get an outside line (i.e. 9). In this
case you would enter 9,,,16175551212.
In order to forward incoming regular calls to a VoIP call, such as through SkypeOut™ or
to a Skype account, enter speed dial number (e.g. 77)associated with the Skype User
without the * key (as shown above).or enter the SkypeOut™ number (e.g.
0016175551212).
As you can see in the screenshot above, when forwarding is enabled, the driver will
disable the computer’s ability to go to standby mode. When the computer tries to go into
a standby mode, you will see the following popup:
If the computer goes to sleep, then toll bypass will not work. To turn this feature off,
uncheck the “Disable Standby/Hibernate” check box.