User manual

Page 4 of 42 Ver 2.41
System Requirements
In order to install the SkyGM-102 adapter you will need the following:
1. SkyGM-102 adapter
2. RJ11 cable
3. Telephone (regular telephone, cordless phone, DECT phone, …)
4. Telephone service (for conf call, 3 way calling and forwarding features)
5. Broadband internet service is recommended
6. PC with the following minimum specifications:
z Pentium 800MHz or equivalent
z Windows 2000、XP、Vista or Windows 7
z Skype™ version 3.8or higher (www.skype.com) must be installed.
z 512MB RAM
z 20MB available hard disk space
z CD-ROM drive to install SkyGM-102 software from the supplied
CD-ROM
7. Recommended PC specification for optimal performance:
z Pentium 1GHz or equivalent
z Windows 2000 、XP、Vista or Windows 7
z Skype™ version 3.8 or higher (www.skype.com) must be installed.
z 512 MB RAM
z 30MB available hard disk space
z CD-ROM drive to install SkyGM-102 software from the supplied
CD-ROM
SkyGM-102 Installing
The following instructions will guide you to through the process of installing
the SkyGM-102 Personal VoIP Gateway.
The installation procedure is to:
• Install Skype™ (step 1 below)
• Install SkyGM-102 driver (step 2 below)
• Confirm SkyGM-102 program installed
• Follow the instructions to the hardware SkyGM-102 access to the
computer USB port, confirm that the installation is complete.
• Verify the installation is OK.
• Connect a telephone handset to the SkyGM-102 adapter.
• Connect the SkyGM-102 adapter to the wall jack. Note that this is
optional and only required for the forwarding and conferencing
features.
• Use your SkyGM-102 adapter to make and receive Skype™ calls.