User Guide
EN - 30
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC
rules and with technical requirements adopted
by the Administrative Council for Terminal
Attachments (ACTA). The label on the back
or bottom of this equipment contains, among
other things, a product identifier in the format
US: AAAKXNANXXXX. This identifier must be
provided to your telephone service provider
upon request.
The plug and jack used to connect this equipment
to premises wiring and the telephone network
must comply with applicable Part 68 rules and
technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is
provided with this product. It is designed to be
connected to a compatible modular jack that is
also compliant. An RJ45 jack should normally
be used for connecting to a single line. See the
installation instructions in the user’s manual.
The Ringer Equivalence Number (REN) is used to
determine how many devices you may connect
to your telephone line and still have them ring
when you are called. The REN for this product is
encoded as the 6th and 7th characters following
the US: in the product identifier (e.g., if ## is 03,
the REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less. For
more information, please contact your telephone
service provider.
This equipment may not be used with Party
Lines. If you have specially wired alarm dialing
equipment connected to your telephone line,
ensure the connection of this equipment does
not disable your alarm equipment. If you
have questions about what will disable alarm
equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must be
unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by the
manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under
VTech Hospitality limited warranty program in
the user’s manual.
To ensure safety of users, the FCC/ISEDC has
established criteria for the amount of radio
frequency energy of the product. This product
has been tested and found to comply with the
FCC/ISEDC criteria. The handset may be safely
held against the ear of the user. The telephone
base shall be installed and used such that parts
of the user's body other than the hands are
maintained at a distance of approximately 20
cm (8 inches) or more.
Pour assurer la sécurité des utilisateurs, la FCC/
ISEDC a établi des critères pour la quantité
d'énergie radiofréquence qui peut être
absorbée en toute sécurité par un utilisateur ou
un spectateur en fonction de l'utilisation prévue
du produit. Ce produit a été testé et déclaré
conforme aux critères FCC/ISEDC. Le combiné
peut être maintenu en toute sécurité contre
l'oreille de l'utilisateur. Le socle du téléphone
doit être installé et utilisé de façon à ce que
les parties du corps de l'utilisateur autres que
les mains soient maintenues à une distance
d'environ 20 cm (8 pouces) ou plus.
If this equipment is causing harm to the telephone
network, your telephone service provider may
temporarily discontinue your telephone service.
Your telephone service provider is required to
notify you before interrupting service. If advance
notice is not practical, you will be notified as soon
as possible. You will be given the opportunity to
correct the problem and your telephone service
provider is required to inform you of your right
to file a complaint with the FCC. Your telephone
service provider may make changes in its
facilities, equipment, operation, or procedures
that could affect the proper functioning of
this product. Your telephone service provider
is required to notify you if such changes are
planned.
If this product is equipped with a corded or
cordless handset, it is hearing aid compatible.
If this product has memory dialing locations,
you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these