Parent’s Guide Revved Up Raceway™ 91-003714-000
INTRODUCTION Thank you for purchasing the Go! Go! Smart Wheels® Revved Up Raceway™! Get ready to flip, jump and spin with the Go! Go! Smart Wheels® Revved Up Raceway™. This interactive raceway features two levels of pretend play and learning fun! Place Rocco the Race Car on the second level platform and choose the launch ramp or the bumpy off-road ramp. Raise the gate to send him sliding down to the roundabout for whirling, twirling fun.
INCLUDED IN THIS PACKAGE NOTE: This toy is not intended for teething.
One base (with roundabout) One base support One adapter One label sheet Three screws One parent’s guide 444
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
GETTING STARTED BATTERY INSTALLATION Race Car 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the Race Car. Use a coin or a screwdriver to loosen the screw. 3. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover.
LABEL APPLICATION Please adhere the labels to the playset securely as indicated on the following pages: 2 4 1 5 7 6 777
12 8 13 18 11 10 22 14 21 9 16 15 20 17 888
ASSEMBLY INSTRUCTIONS Revved Up Raceway™ With the Go! Go! Smart Wheels® Revved Up Raceway™, safety comes first. To ensure your child’s safety, adult assembly is required. 1. Place the Racing Platform right-side up and insert the Gallery, Gate A and Gate B. Next insert the two Platform Supports into the slots underneath the Racing Platform, as shown below. You will hear a “click” sound to indicate the pieces are secure. Note: Once the Gallery is attached, it cannot be removed. 2.
3. Next, assemble and attach the base components following the steps below: A. With the Base and the Repair Deck upside down, attach the Repair Deck to the Base, insert the Base Support as shown and tighten the three Screws to secure it to the unit, as shown below. B. Turn the Base right-side up, lift the Repair Deck and insert the Lever into its Base, as shown below.
C. Attach the Flipping Sign to the Sign Post, then insert the Sign Post into the slot on the Base. Attach the Adapter and the Handle to the Base, as shown below. 4. Attach the Jump Track and the Bumpy Track to the Base, as shown below.
Once you’ve completed the above steps, you are ready to play! You can also connect the playset to other Go! Go! Smart Wheels® playsets (each sold separately). EXPAND & EXPLORE Connect to the Go! Go! Smart Wheels® Roadmaster Train Set™ and Go! Go! Smart Wheels® Track Pack™ (as shown below) or other Go! Go! Smart Wheels® playsets (each sold separately) to expand the Revved Up Raceway™ and inspire creativity.
PRODUCT FEATURES Race Car 1. ON/OFF SWITCH To turn the Race Car On, slide the On/ Off Switch to the On position. To turn the Race Car Off, slide the On/ Off Switch to the Off position. 2. AUTOMATIC SHUT-OFF To preser ve batter y life, the included Race Car will automatically power down after approximately 60 seconds without input. The unit can only be turned on again by pressing the Light-Up Button or Action Button, pushing the Race Car quickly or triggering a SmartPoint ® location.
2. Press the Light-Up Button to hear fun sounds, songs, phrases and melodies. The light will flash with the sounds. 3. Press the Action Button on the vehicle to activate a mechanical feature and hear a fun sound. The light will flash with the sounds. 4. Push the Race Car to hear fun sounds. If a melody is already playing, push the Race Car to add fun sounds on top of the melody. The light will flash with the sounds. 5.
ACTIVITIES Revved Up Raceway™ 1. Place the Race Car or any SmartPoint® vehicle (each sold separately) on any of the playset’s three SmartPoint® locations to trigger fun sounds, short tunes or phrases. 2. Place the Race Car on the Racing Platform and raise the Gate. The Race Car will slide down the track and jump into the Roundabout at the base. 3. Place the Race Car on the repair deck, and press down on the lever to raise the deck.
SONGS 1. I’m revved up and ready to go, Step on it fast, hit the gas! I’m revved up and ready to go, Race around the track so fast! 2. I love to race and love to zoom, I was made to race fast, Rev my engine, here we go! Zooming to the finish! 3. Go! Go! Smart Wheels! Go! Go! Smart Wheels! I’m a Go Go Smart Wheels race car. Cheer me on at the track! (Go! Go!) Speedy and swift, that’s who I am. Let’s Go! Go! and see! (Go! Go!) 4. Go! Go! Smart Wheels! Go! Go! Smart Wheels! MELODY LIST 1. 2. 3. 4. 5. 6.
CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit will not be in use for an extended period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water. TROUBLESHOOTING If for some reason the unit stops working or malfunctions, please follow these steps: 1. Please turn the unit OFF. 2.
IMPORTANT NOTE: Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Supplier’s Declaration of Conformity Trade Name: VTech® Model: 5145 Product Name: Revved Up RacewayTM Responsible Party: VTech Electronics North America, LLC Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004 Website: vtechkids.com THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Visit our website for more information about our products, downloads, resources and more. vtechkids.com Read our complete warranty policy online at vtechkids.com/warranty TM & © 2019 VTech Holdings Limited. All rights reserved. Printed in China.
