User Manual

ASSEMBLY INSTRUCTIONS

1. Attach the mobile to the bottom of the

electronic module. You will hear the

mobile click into place when inserted

correctly.

2. Attach the mobile support post to cribs

with rails that are between .40 inches

and 1.57 inches wide. Twist the green

sleeve to tighten the clamp to the crib

rail. Pull slightly on the support post

to make sure the clamp has been

securely fastened. Please check the

support post frequently to ensure it is

still secure. Do not clamp mobile on

a circular bar or surfaces wrapped in

fabric.

3. Attach the electronic module to the

support post by pressing the small

green button on the support post while

sliding the electronic module onto the

support post. Check to make sure the

electronic module is attached securely

to avoid injuries.

To ensure your child’s safety, adult assembly is required. Please

ensure that the crib attachment clamp is securely locked into

position to avoid injury. Follow the instructions below carefully and

make sure the final assembly is correct.