User’s Manual Launch & Chase Police TowerTM 91-003514-000
INTRODUCTION Thank you for purchasing the Go! Go! Smart Wheels® Launch & Chase Police Tower™ by VTech® ! Watch the Police Car come to life when you race him around the course and over the five SmartPoint® locations.
INCLUDED IN THIS PACKAGE SmartPoint® Police Car Getaway Car Ramp support Jail base Jail wall Fuel pump Base Dual tower Track 1 Track 2 Track 3 Track 4 333
Track 5 Track 8 Gate Launcher 2 Track 6 Track 9 Track sign Launcher 1 support Track 7 Two roadblocks Launcher 1 Launcher 2 support 444
Hideout Police station wall Hideout base Police station base Fuel platform - One label sheet - One parent’s guide 555
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. Attention Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
GETTING STARTED BATTERY INSTALLATION Police Car 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the Police Car. Use a coin or screwdriver to loosen the screw. 3. Install two new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover.
Please adhere the labels to the playset securely as indicated on the following pages below: 2 1 4 5 3 8 7 6 10 9 11 13 12 14 16 15 19 18 17 888
3 4 2 12 6 14 8 7 5 15 1 9 18 10 13 11 17 16 19 19 999
ASSEMBLY INSTRUCTIONS Launch & Chase Police Tower™ With the VTech® Go! Go! Smart Wheels® Launch & Chase Police Tower™, safety comes first. To ensure your child’s safety, adult assembly is required. 1. Insert both the Ramp Support and the Jail Wall into the Jail Base, as shown below. 2. Connect the Jail Base and Fuel Platform to the Base, as shown below. 3. Insert the Fuel Pump and Dual Tower into the slots on the Base, as shown below.
4. Insert the Police Station Wall into the Police Station Base and the Hideout into the the Hideout Base. Then, connect the bases to the Dual Tower, as shown below. 5. Attach Track 9 to the Dual Tower, as shown below. 6. Attach Track 2 to the Dual Tower, as shown below. 7. Attach Track 1 to the Ramp Support and Track 2, as shown below.
8. Connect Track 3 to Track 2 and the Dual Tower, as shown below. 9. Insert the two Roadblocks and Gate into Track 4, as shown below. 10. Connect Track 4 to Track 9 and Ramp Support. Then, attach Track 3 to Track 4, as shown below.
11. Connect Track 5 to Track 4 and the Dual Tower, as shown below. 12. Attach Track 5 to Track 6. Then, insert Track 6 into the Dual Tower, as shown below. 13. Attach Track 6 to Track 9, as shown below.
. Attach the Track Sign to Track 8. Then, insert the Launcher Supports into the Dual Tower. Finally, connect Track 8 and Track 7 to the Launcher Supports and Track 6, as shown below. 15. Attach Launcher 1 to Track 8 and connect Launcher 2 to Track 7, as shown below.
Once you’ve completed the above steps, you are ready to play! You can connect the playset to other Go! Go! Smart Wheels® playsets and tracks (each sold separately). EXPAND & EXPLORE Connect to the Go! Go! Smart Wheels® Save the Day Fire Station™ (as shown below) or other Go! Go! Smart Wheels® playsets (each sold separately) to expand the Launch & Chase Police Tower™ and inspire creativity.
PRODUCT FEATURES Police Car 1. ON/OFF SWITCH To turn the unit ON, slide the On/Off Switch to the ON ( ) position. To turn the unit OFF, slide the On/Off Switch to the OFF ( ) position. 2. AUTOMATIC SHUT-OFF To preserve battery life, the included Police Car will automatically power down after approximately 60 seconds without input. The unit can be turned on again by pressing the Light-Up Button, pushing quickly or triggering a SmartPoint ® location. Note: This product is in try-me mode in the packaging.
2. Press the Light-Up Button to hear sounds, songs and phrases. The light will flash with sounds. 3. Push the Police Car to hear fun sounds and melodies. While a melody is playing, push the Police Car again to add in fun sounds on top of the melody. The light will flash with the sounds. 4. For added fun, the Police Car interacts with the Go! Go! Smart Wheels® Launch & Chase Police Tower™.
ACTIVITIES Launch & Chase Police Tower™ 1. P l a c e t h e Po l i c e C a r o r a ny SmartPoint ® vehicle (each sold separately) on the five SmartPoint® locations to trigger fun sounds, songs or phrases 2. Put the Police Car and Getaway Car in the SmartPoint® launchers, lift the launchers and watch them race to the bottom. 3. Try to slow down the Getaway Car by exposing the speed bumps, raising the barricades and moving the switch track.
SONGS 1. I’m the Go! Go! Smart police car, police car, police car, I’m the Go! Go! Smart police car, Cruising ‘round the town 2. Time to turn on the siren, the siren, the siren, Time to turn on the siren, We’re racing to the scene! 3. Get to the scene and follow clues, To catch the bad guy and his crew! MELODY LIST 1. 2. 3. 4. 5. 6.
CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit will not be in use for an extended period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water. TROUBLESHOOTING If for some reason the unit stops working, please follow these steps: 1. Please turn the unit OFF. 2. Interrupt the power supply by removing the batteries.
IMPORTANT NOTE: Creating and developing Infant Learning products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Visit our website for more information about our products, downloads, resources and more. vtechkids.com Read our complete warranty policy online at vtechkids.com/warranty TM & © 2018 VTech Holdings Limited. All rights reserved. Printed in China.