Parent’s Guide Tow & Go Garage ™ 91-003497-000
INTRODUCTION Thank you for purchasing the VTech® Go! Go! Smart Wheels® Tow & Go Garage™! Park, learn and play with the Go! Go! Smart Wheels® Tow & Go Garage™. This interactive garage features two floors of pretend play and learning fun! Place Trent the Tow Truck on the elevator and watch him spin when raised up to the second level platform.
INCLUDED IN THIS PACKAGE NOTE: This toy is not intended for teething.
One helipad platform Two helipad supports One repair platform One ramp track support Ramp track A Ramp track B Two gears One ticket booth One second level sign One gate One gate base arm - One parent’s guide One platform track One label sheet 444
WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please keep this parent’s guide as it contains important information. ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
GETTING STARTED BATTERY INSTALLATION Tow Truck 1. Make sure the unit is turned OFF. 2. Locate the battery cover on the bottom of the Tow Truck. Use a screwdriver to loosen the screw. 3. Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure the battery cover.
LABEL APPLICATION Please adhere the labels to the playset securely as indicated on the following pages: 1 3 1 4 2 5 6 22 777
11 18 16 23 17 10 24 9 12 27 7 8 14 13 13 13 15 13 19 28 29 25 26 888
ASSEMBLY INSTRUCTIONS Tow & Go Garage™ With the VTech® Go! Go! Smart Wheels® Tow & Go Garage™, safety comes first. To ensure your child’s safety, adult assembly is required. 1. With the Base right-side up, insert the Center Support, Pillar Support, Elevator Support and Elevator Gate into the slots on the Base, as shown below. You will hear a “click” sound to indicate the pieces are secure. 2. With the Second Level Platform right-side up, attach it to the three connected supports, as shown below.
3. Next, assemble and attach the elevator components following the steps below: A. Slide the Elevator Platform into the slot on the Elevator Wall, as shown below. Lift the handle and press down on the Elevator Platform to lower it. B. Then, attach the Elevator Wall to the Base and Second Level Platform, as shown below. You will hear a “click” sound to indicate the Elevator Wall is secure. C. Connect the Elevator Bracket to the Elevator Wall and Elevator Gate, as shown below.
4. Assemble and attach the Car Wash, Spiral Ramp and Repair Platform following the steps below: A. Attach the Car Wash Brush to the Car Wash Gate, as shown below. Once the pieces are attached, connect the Car Wash Gate to the Car Wash Platform, as shown below. Note: Once the Car Wash Gate is attached, it cannot be removed. B. Attach Ramp Track A to the Ramp Track Support. Then, attach the Repair Platform to the Ramp Track Support and Ramp Track A, as shown below.
C. Attach Ramp Track B to Ramp Track A. Then, attach the Car Wash to Ramp Track A and Ramp Track B, as shown below. D. Lastly, attach Ramp Track A to the Second Level. Then, attach the Car Wash Platform and Ramp Track B to the Base, as shown below. 5. Insert the Helipad Supports into the bottom of the Helipad Platform, and then attach to the Second Level Platform, as shown below.
6. Insert the Ticket Booth, Second Level Sign and Gears into the Second Level Platform, as shown below. You will hear a “click” sound to indicate the pieces are secure. 7. Insert the Gate Arm through the bottom of the Gate Base. Then, attach the Gate to the Base, and the Platform Track to the Ramp Track Support, as shown below. Once you’ve completed the above steps, you are ready to play! You can connect the playset to other Go! Go! Smart Wheels® playsets (each sold separately).
EXPAND & EXPLORE Connect to the Go! Go! Smart Wheels® Deluxe Track Set (as shown below) or other Go! Go! Smart Wheels® playsets (each sold separately) to expand the Tow & Go Garage™ and inspire creativity. PRODUCT FEATURES Tow Truck 1. ON/OFF SWITCH To turn the Tow Truck ON, slide the ON/OFF SWITCH on the Tow Truck to the ON ( ) position. To turn the Tow Truck OFF, slide the ON/OFF SWITCH to the OFF ( ) position. 2.
ACTIVITIES Tow Truck 1. Slide the On/Off Switch to turn the Tow Truck ON. You will hear a song, fun phrases and sounds. The light will flash with the sounds. 2. Press the Light-Up Button to hear fun sounds, songs and phrases. The light will flash with the sounds. 3. Push the Tow Truck to hear fun sounds and melodies. While a melody is playing, continue pushing the Tow Truck to add in fun sounds on the top of the melody. The light will flash with the sounds. 4.
ACTIVITIES Tow & Go Garage™ 1. P l a c e t h e Tow Tr u ck o r a ny SmartPoint ® vehicle (each sold separately) on any of the playset’s nine SmartPoint® locations to trigger fun sounds, songs or phrases. 2. Place the Tow Truck on the elevator, and raise the elevator to the second floor. Once the elevator reaches the top, the Tow Truck will slide out of the elevator to the second floor. 3. Roll the Tow Truck down the spiral ramp and the vehicle will stop at the car wash.
SONGS 1. My friend needs my help on the road, Here I, here I go! 2. Do you need a tow? Where’d you like to go? I’ll keep you safe and sound! 3. If your car breaks down, I will tow it back to town. MELODY LIST 1. 2. 3. 4. 5. 6. Mexican Hat Dance Oh, Dear! What Can the Matter Be? Oranges and Lemons The Red River Valley Sing a Song of Sixpence Ta-ra-ra Boom-de-ay CARE & MAINTENANCE 1. Keep the unit clean by wiping it with a slightly damp cloth. 2.
TROUBLESHOOTING If for some reason the unit stops working or malfunctions, please follow these steps: 1. Please turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit sit for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. 5. If the product still does not work, replace with an entire set of new batteries. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PRODUCT WARRANTY This Warranty is applicable only to the original purchaser, is non-transferable and applies only to “VTech” products or parts. This product is covered by a 3-month Warranty from the original purchase date, under normal use and service, against defective workmanship and materials.
Visit our website for more information about our products, downloads, resources and more. vtechkids.com TM & © 2018 VTech Holdings Limited. All rights reserved. Printed in China.
