User Manual

Go! Go! Smart Wheels
®
SmartPoint
®
Vehicle
User’s Manual
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a coin or a screwdriver to loosen the
screw.
3. Install 2 new “AAA” (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
WARNING: All packing materials, such
as tape, plastic sheets, packaging locks and tags are
not part of this toy, and should be discarded for your
child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
NOTE: Please keep this user’s manual as it contains important
information.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(ifremovable).
• Rechargeablebatteriesareonlytobechargedunderadultsupervision.
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF
SWITCH to the ON (
) position. To turn
the unit OFF, slide the ON/OFF SWITCH to
the OFF (
) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech
®
Go! Go! Smart Wheels
®
vehicle will
automatically power-down after approximately 60 seconds without input.
The unit can only be turned on again by pressing the light-up driver button or
pushing the vehicle quickly.
NOTE: This product is in a try-me mode in the packaging. After opening the
package, turn the vehicle off and on again to proceed with normal play. If the unit
repeatedly powers down quickly or the light-up press button fades out, we suggest
changing the batteries.
NOTE: Ce produit est actuellement en mode démonstration. Une fois déballé,
veuillez éteindre puis remettre en marche ce jouet pour activer toutes ses
fonctionnalités.
ACTIVITIES
1. Slide the ON/OFF SWITCH to turn the unit ON.
You will hear sounds, a song and a phrase. The
light will flash with the sounds.
2. Press the LIGHT-UP BUTTON to hear sounds,
songs and phrases. The light will flash with the
sounds.
1
2
91-002893-029
Turn the packaging lock counter-
clockwise several times.
Pull out and discard the packaging lock.
Unlock the packaging locks:
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-zinc)or
rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.