User Manual

8
TO BEGIN USING
KIDIzOOM
®
SMARTWATCH DX2
Make sure the Master Power Switch is set to the ON position and
that the battery is fully charged before using the watch.
To wake the watch, either press the Home Button
, Shutter
Button , or double-tap the screen.
When turning on the watch for the rst time, the date and time setting
screen will display rst. Swipe up or down over the month, day, year, hours
and minutes to set the current date and time. Tap the check icon
when you're done.
When the clock appears on screen, press the Home Button to go to
the Home Menu. Press the Shutter Button to take photos and videos.
AUTOMATIC SCREEN OFF
To preserve battery life, the screen will automatically shut off after a
short period of time when in Clock Mode.
Note: The auto screen off time can be adjusted in Settings / Advanced /
Auto Screen Off. Please refer to the Settings section in this guide. From
other activities, the watch screen will return to Clock Mode automatically
if there is no input for 1 minute. When it is in Camera Mode, it will auto-
exit after 3 minutes of inactivity. When in Slideshow Mode, the auto-exit
time is approximately 15 minutes.
CONNECTING TO A COMPUTER
You can connect KidiZoom
®
Smartwatch DX2 to a PC or Mac computer
using the included Micro-USB Cable. To transfer les between your
watch and computer, follow these steps:
• Pull up the rubber cover of the Micro-USB Port on the side of your
watch.
• Insert the Micro-USB Cable (small end) into the Micro-USB Port on
the watch.
• Insert the larger end of the cable into a USB port on your computer.
A USB port is usually marked with this symbol
.