User Manual

6
• Insert the large end of the Micro-USB Cable into a USB port on your
computer. A USB port is usually marked with this symbol: .
• Once the connection is successful, you will see a battery recharging
symbol appear on the watch screen.
• Check the charging progress regularly throughout recharging.
• When the battery is fully charged, a message will display on the
screen for a while before the screen automatically turns off. You may
then disconnect your fully charged watch from the computer.
Note: It will take approximately 3 hours to fully charge the battery. The
actual charging time depends on the charging current, the remaining
charge in the battery prior to recharging, and the ambient temperature.
The optimum ambient temperature is 32°F - 104°F (0°C to 40°C).
BATTERY LIFE
The time the battery lasts between charges depends on play. Like other
electronic devices, more frequent usage will drain the battery more
quickly. Some activities are more demanding on the battery, such as
taking photos and videos. The remaining battery capacity will appear
in the top right corner of the screen. When the battery level is low, it
is recommended to recharge the battery before further use. When the
battery level is too low, the watch will not turn on until it is charged.
Battery Time for Reference
Condition Battery Time
Low Usage 2 weeks
Typical Usage 2-3 days
Heavy Usage 1 day
Note: The above battery time assumptions are based on the screen
display set to turn off when not in use.
Battery Maintenance
Charge the battery regularly to keep it operating at optimum performance,
even when the watch isn’t regularly in use. For example, charge the
watch at least once every six months. Move the Master Power Switch
to the ON position before recharging the battery. Move the Master
Power Switch to the OFF position if the watch will not be in use for an
extended period of time.