User’s Manual Gallop & Rock Learning Pony TM © 2016 VTech Printed in China 91-003259-001 US
INTRODUCTION Thank you for purchasing the VTech® Gallop & Rock Learning Pony . TM The Gallop & Rock Learning Pony easily transforms from a rocker to a ride-on. The two chunky handles are easy for toddlers to grasp when riding on the pony. Press one of the three light-up buttons to learn about colors and animals, and hear playful songs and imaginative phrases. Rocking or riding on the pony triggers the motion sensor and responds with fun melodies and sounds.
One Gallop & Rock Learning Pony Four wheels Two rockers One front link bracket Two handles One back link bracket TM - 8 small screws One user’s manual One sheet of labels Included In This Package INCLUDED IN THIS PACKAGE Two plastic screws 4
WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy, and should be discarded for your child’s safety. ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous de tous les produits d’emballage tels que rubans adhésifs, feuilles de plastique, attaches et étiquettes. Ils ne font pas partie du jouet. NOTE: Please keep user’s manual as it contains important information. BATTERY INSTALLATION 1. Make sure the unit is turned OFF. 2.
• Remove batteries during long periods of non-use. Do not dispose of batteries in fire. Do not charge non-rechargeable batteries. Remove rechargeable batteries from the toy before charging (if removable). Rechargeable batteries are only to be charged under adult supervision. WARNING! With the VTech® Gallop & Rock Learning Pony safety comes first: Adult assembly required. Not to be used by children over 36 months. Insufficient strength. 20kg Max. Protective equipment should be worn.
ASSEMBLY INSTRUCTIONS 2. Insert the front link bracket and the back link bracket into the inside of the rockers. Secure the brackets to the rockers with the small screws provided. 3. Insert the Gallop & Rock Learning Pony onto the support brackets as shown. TM Assembly Instructions 1. Insert the 4 wheels into the two rockers as shown. You will hear the wheels click into place to indicate they are attached securely. 4.
TRANSFORM FROM ROCKER TO RIDE-ON MODE 6. To change the pony from the rocker mode to the ride-on mode, press and hold the lock next to the plastic screws and turn the screws counter-clockwise. Remove the rocker panel and turn it over so the wheels are on the ground. Re-insert the two plastic screws into the holes in the front link and back link brackets. Turn the screws clockwise to secure. PRODUCT FEATURES 1.
2. VOLUME CONTROL SWITCH To adjust the volume, slide the VOLUME CONTROL SWITCH to the LOW VOLUME ( ) or the HIGH VOLUME ( ) position. 3. AUTOMATIC SHUT-OFF To preserve battery life, the VTech® Gallop & Rock Learning Pony will automatically power-down after approximately 65 seconds without input. The unit can be turned on again by pressing any button, or turning the disc. Note: If the unit repeatedly powers down quickly, we suggest changing the batteries. ACTIVITIES 1.
4. Rock or ride the pony to activate the motion sensor. In the Learning & Music Mode you will hear playful melodies. In the Adventure Mode you will hear a variety of fun sounds. The lights will flash with the sounds. The faster you ride, the faster the lights will flash. MELODY LIST 1. Pop Goes the Weasel 2. Ring Around the Rosy 3. Old MacDonald 4. Farmer in the Dell 5. Sailing, Sailing 6. Down by the Riverside 7. Oh, Susanna 8. Bear Went Over the Mountain 9. Yankee Doodle 10. Polly Wolly Doodle 11.
SONG 1 Klip, klop, klippity, kloppity, We are on our way. SONG 2 We are going on an adventure! We are galloping through the tall trees, We are in the forest. SONG 3 We are going on an adventure! We are running through the grassy field, We are at the farm! SONG 4 We are going on an adventure! We are trotting on the sandy ground. We are at the beach! SONG 5 Hop into the saddle, hold on tight, I’m ready to ride. CARE & MAINTENANCE 1. Keep the unit clean by wiping with a slightly damp cloth. 2.
TROUBLESHOOTING 1. Please turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play again. 5. If the product still does not work, replace with a new set of batteries. If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our web site at www.vtechkids.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
