User’s Manual Drill & Learn Toolbox TM © 2016 VTech All rights reserved Printed in China 91-003209-005 US
INTRODUCTION Thank you for purchasing the VTech® Drill & Learn ToolboxTM! Pretend to build or repair things with the drill, hammer and wrench while learning cool tool facts, numbers, colors, objects and more. Use the project cards, follow the instructions and pretend to repair different objects.
INCLUDED IN THIS PACKAGE • • One VTech® Drill & Learn ToolboxTM Tool accessories: drill, hammer, wrench, 2 screws, 2 nails, 2 double-sided project cards One electronic project tray User’s manual WARNING: All packing materials, such as tape, plastic sheets, packaging locks and tags are not part of this toy, and should be discarded for your child’s safety.
GETTING STARTED NOTE: For best performance, remove all factory-installed batteries from the VTech® Drill & Learn ToolboxTM and use new alkaline batteries. 1. Make sure the unit is OFF. 2. Locate the battery cover on the bottom of the ELECTRONIC PROJECT TRAY and open it with a screwdriver. 3. Install 2 new “AA” size batteries following the diagram inside the battery box. (New alkaline batteries are recommended for maximum performance.) 4. Replace the battery cover and tighten the screw to secure.
ACTIVATING NORMAL PLAY MODE When the product is taken out of the packaging, turn it on and insert a PROJECT CARD. You will hear a beep and a voice confirming you are in normal play mode. PRODUCT FEATURES To turn the unit ON or adjust the volume, slide the switch to LOW or HIGH. To turn the unit OFF, slide the switch to OFF. 2. MODE SELECTOR Slide the MODE SELECTOR to choose an activity. Choose from three activities. 3.
6. DRILL Use the DRILL to drill screws into the TRAY HOLES. The DRILL can turn clockwise or counterclockwise by sliding the DIRECTION SWITCH on the side. 7. ACCESSORIES 8. AUTOMATIC SHUT-OFF To prolong battery life, the VTech® Drill & Learn ToolboxTM will shut off automatically after several minutes without input. The unit can be turned on again by sliding the OFF/VOLUME SWITCH or sliding the MODE SELECTOR. The unit will also automatically turn off when the batteries are very low.
ACTIVITIES 1. FREE PLAY MODE Press the three TOOL BUTTONS to learn about tools, sounds and colors. Use the DRILL, HAMMER or WRENCH to drill SCREWS or hammer NAILS into the TRAY HOLES. If no PROJECT CARD is inserted, you will hear sounds and phrases. If a PROJECT CARD is inserted into the CARD SLOT, drill the SCREWS or hammer the NAILS into the TRAY HOLES to learn about numbers, more than or less than, colors, spelling, vehicles, objects and more. 2.
SUNG SONG LYRICS Colors Card: Let’s shout out colors, to the beat. Red, yellow, white, pink and green, I’m a super-duper fix-it machine. Construction orange, purple, brown and blue, Numbers Card: One, two, grab a screw. Three, four, drill some more. Five, six, it’s all fixed! Seven, eight, nine, feeling fine! Vehicles Card: Things that go fast and slow, Need lots of care.
Wrench Song: Righty tighty, lefty loosey, I love my trusty wrench. Righty tighty, lefty loosey, It lives inside my tool bench! I need a nail and a hammer. I need a hammer and a nail.
1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct heat source. 3. Remove the batteries when the unit is not in use for an extended period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water. TROUBLESHOOTING If for some reason the program/activity stops working or the unit can’t be turned on again, please follow the following steps: 1. Turn the unit OFF. 2.
IMPORTANT NOTE: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
12 NOTE
Register your product online at vtechkids.com/warranty. PRODUCT WARRANTY This Warranty is applicable only to the original purchaser, is non-transferable and applies only to “VTech” products or parts. This product is covered by a 3-month Warranty from the original purchase date, under normal use and service, against defective workmanship and materials.
