User Manual

4
Adjusting Device Settings
There are several other options in Parent Settings that will allow you
to control your device’s Wi-Fi connection, edit your child’s profile
information or your Learning Lodge
®
account information, and
manage detailed device settings.
If You Forget Your Parent Settings Passcode
If you forget your Parent Settings passcode, go to the passcode
screen and enter the number 9876543210. We'll send you an email to
tell you your passcode.
Charging the Device
To charge the device, first connect the included USB cable to the KidiBuzz™
by inserting the small end of the cable into the micro-USB port on your device.
Insert the larger end of the USB cable into the USB socket of the Power
Adapter and plug the Adapter into a wall socket.
You can also charge the device by plugging the larger end of the USB
cable into a computer’s USB port.
Guidelines for charging
Only charge this device using the included micro USB cable connected to
a computer or the included power adapter. Do not charge using a third
party adapter. Before use, inspect the cord to confirm that it is in good
condition and that there are no breaks or exposed wires. Ensure there
are no particles or liquid (water, juice, etc.) in either of the
connectors before plugging in either end of the cable. The
device should be completely dry with no debris in the cable
connectors when charging. Plug in the cable securely, in
the correct orientation. If the device is on when plugged
in, a dialog box may open on your computer to allow
you to access the device's drive. Never leave the device
unattended while charging. Do not charge your device
on soft surfaces, as they can trap heat around the device.
Typical charging time is between 2-3 hours if the battery is fully depleted.
Disconnect the device when it is fully charged. Do not leave the device
charging for more than 4 hours.
USB Cable and
Power Adapter
Other Information
Micro-USB Port Micro-USB Port