User Manual

6
6
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult supervision.
HOW TO PLAY
Press the On/Off Button to turn the unit ON.
Drawing on Paper:
In any of the Connect the Dots drawing activities, put a piece of blank
paper on the Light-Up Dots Area & White Board Surface to draw. It is
not necessary to slide the paper into the unit.
Blank sheets of paper should be 8.5 x 5.5 in. (half letter size). Do not fold
the paper before placing it on the Light-Up Dots Area & White Board
Surface, as the light-up dots cannot be seen clearly if the paper is too
thick. To be environmentally friendly, we recommend using recycled
paper.
The Paper Lock will help keep the paper secure. To open the Paper
Lock, use your nger to push on the top of the clip. To close it, push
the clip down.
Drawing on the White Board Surface:
Use a dry-erase marker or water-based marker (each sold separately) to
draw on the White Board Surface.
To clean the White Board Surface, wipe with a slightly damp cloth to
erase the drawing or other dirt.