User`s manual

www.vtechphones.com
50
Telephone settings
Telephone settings
Clock setting
To set the clock manually:
Step 1: Press the MENU softkey from the idle screen.
Step 2: Press the , , and/or NavKeys to choose Settings, then
press the SELECT softkey or the center NavKey/SELECT/ .
Step 3: Press the up or down NavKey or to choose Clock Setting,
then press the SELECT softkey or the center NavKey/SELECT/ .
Step 4: Press the up or down NavKey or to choose Manual, then press
the SELECT softkey or the center NavKey/SELECT/ . The current
time will be displayed.
Step 5: Press the up or down NavKey or to adjust the number by
increments of 1 while the eld is highlighted.
-OR-
Use the keypad (see Chart of characters on page 37) to enter the
time directly.
Step 6: Press the left or right NavKey or to move the cursor to the next
eld.
Step 7: Repeat Steps 5-6 until the eld of AM/PM is highlighted. Press the
up or down NavKey or to choose between AM or PM.
Step 8: While the time is correct, press the SAVE softkey or
the center NavKey/SELECT/ to conrm.
BACK SELECT
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
Key Tone
Settings
Clock Setting
BACK SELECT
Clock Setting
IM Alert Tone
Keypad Backlight
Clear Voice Mail
Default Settings
Key Tone
Settings
CID
PC
Manual
BACK SAVE
07:11 PM
Manual Clock Input
If you enter an
invalid time (e.g.
27:76), the entry
will not be saved.
Only the 12-hour
clock format is
accepted in the
clock setting.
•
•