- Vtech Cordless Telephones Owner's Manual
Table Of Contents
- About cordless telephones
- Advanced operation
- Basic operation
- Battery
- Call log
- Call waiting
- Chart of characters
- Clear voicemail
- Date and time
- Delete one or all entries from redial
- Delete one or all entries in the call log
- Delete one or all entries in the directory
- Desk/table bracket installation
- Dial a call log number
- Dial a directory entry
- Dial a number from redial
- Dial type
- Directory
- Edit an entry in the directory
- Edit handset name
- FCC, ACTA and IC regulations
- Find handset
- Handset and telephone base indicators
- Handset display screen messages
- Handset icons
- Handset layout
- Handset light
- Important safety instructions
- Index
- Installation
- Install handset battery
- Key tone
- Language
- Maintenance
- Mute
- Operating range
- Options while on calls
- Out of range tone
- Parts checklist
- Redial
- Reset to default settings
- Review redial
- Review the call log
- Review the directory
- Ring melody
- Ring volume
- Search the directory
- Speakerphone
- Store an entry in the directory
- Store a number from redial to the directory
- Store a number from the call log
- Technical specifications
- Telephone base installation
- Telephone base lights
- Telephone settings
- The RBRC® Seal
- Troubleshooting
- Warranty
www.vtechphones.com
4
Dial type
If you have touch-tone service, your telephone is ready to use as soon as the battery is charged.
If you have pulse (rotary) service, the dial type must be changed. To change the dial type, see
Dial type section on page 12.
Installation
Desk/table bracket installation
The telephone base comes with the desk/table bracket installed and ready for tabletop use.
To remove the bracket:
1. Push the bracket away from the telephone
base as shown below. Do not remove the
bracket by force to avoid breakage of
the tabs.
To install the bracket:
1. Align the tabs of the bracket with the slots
at the bottom of the telephone base as
shown in the diagram.
2. Slide the bracket towards the center
of the telephone base until it clicks
into place.