User`s manual

13
Telephone settings
Handset settings
Key tone
The handset is programmed to beep with each key press. You can turn
KEY TONE off, so there are no beeps when you press keys.
Press MENU/SELECT in idle mode to enter the main menu.
Press DIR or CID to scroll to >SETTINGS, then press
MENU/SELECT.
Press DIR or CID to scroll to >KEY TONE, then press
MENU/SELECT.
Press DIR or CID to select ON or OFF.
Press MENU/SELECT to save your preference.
Set date/time
The answering system announces the day of the week and time of each
message received prior to playing it. If you subscribe to caller ID service, the
day, month and time are set automatically with each incoming call (see
About caller ID on page 35). However, the year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time.
Follow Steps 1 and 2 in Key tone on this page.
Press DIR or CID to scroll to >SET DATE/TIME, then press MENU/SELECT.
Use the dial pad keys (0-9) to enter the two-digit number
(01-12) for the month.
Use the dial pad keys (0-9) to enter the two-digit number
(01-31) for the day.
Use the dial pad keys (0-9) to enter the two-digit number
(00-99) for the year. Press MENU/SELECT.
Use the dial pad keys (0-9) to enter the two-digit number
(01-12) for the hour.
Use the dial pad keys (0-9) to enter the two-digit number
(00-59) for the minute.
Press DIR or CID to choose AM or PM. Press MENU/SELECT to confirm. A
confirmation tone sounds.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
KEY TONE
>ON
SET DATE
11/20/09
SET TIME
10:30 PM