Operating instructions

19
4 When you finish entering the name, press SELECT or PROG/CHAN .
The screen displays ENTER NUMBER.
5 Enter the telephone number. Use to backspace and make a
correction. Press REDIAL/PAUSE to store a pause in the dialing
sequence.
—OR—
Press REDIAL/PAUSE to display the last number dialed from this phone.
6 Press SELECT or PROG/CHAN . The screen displays DISTINCT
RING?
and the current setting.
7 Press or to change the setting. Choose Y (for Yes) if you wish the
phone to alert you to calls from this number by changing to a
distinctive ringing pattern after the first ring. Choose N (for No) for a
normal ringing pattern.
8 Press SELECT or PROG/CHAN to confirm your selection. If you
chose Y in Step 7,a D will be displayed with the directory entry.
Note: When memory is full the screen displays MEMORY FULL , an error
tone sounds, and you will not be able to store a new number until you delete a
stored number.
Edit a Number/Name Stored in the Directory
1 Press ( ). The screen displays DIRECTORY.
2 Press or to scroll alphabetically through entries stored in memory
—OR—
Press the dial pad key for the first letter of the entry you want to edit.
3 When the screen displays the number you want to edit, press
SELECT . Then press or until EDIT flashes.
4 Press SELECT . The screen displays the name and number. The flashing
cursor appears at the end of the name. Use , and the dial pad
keys to edit the name. Press SELECT to move on to edit the number.
Press SELECT to move to edit the Distinctive Ring setting.
5 Press SELECT to save the edited information.The screen displays
DISTINCT RING? and the current setting.
6 Press or to change the setting . Choose Y (for Yes) if you wish to
phone to alert you to calls from this number by changing to a distinctive
ringing pattern after the first ring. Choose N (for No) for a normal ringing
pattern .
7 Press SELECT to confirm your selection . If you chose Y in Step 6 ,
a D will be displayed with the memory entry .
TELEPHONE DIRECTORY
DIAL EDIT ERASE
9735550123