Parents’ Guide The full KidiCom® Advance Parents' Guide can be found online at https://www.vtech.co.
Getting Started Register your KidiCom® Advance 3.0 device to access: • The full collection of educational games that come with this device • 20 FREE apps from Learning Lodge™, a VTech® online store1 • Kid-friendly messaging with the KidiCom Chat™ app • Access to parent settings where you can manage your child’s apps, set time limits, and more 1. CHARGE your KidiCom® Advance 3.0 device using either the included power adapter plugged in to the wall, or the included USB cord plugged into a computer.
Key Features Rotatable Camera MagLens Touch Screen Charging Indicator Light Microphone Power Button Volume + / Buttons microSD Card Slot (microSD card not included) Micro-USB/Charging Port Headphone Jack Speaker 2
Parent Settings To enter Parent Settings, touch the Parents icon on the second page of your child's home screen. From Parent Settings, you can control the way your child plays by adding or removing apps, setting time limits, managing access to the Web, and adjusting device settings. Adding or Removing Apps Browse the Learning Lodge™ store for a selection of age-appropriate educational apps that have been approved by VTech® learning experts.
Additional Information OFF ON Using the MagLens • The MagLens can be used to help take close-up photos. To use it, first rotate the camera unit so it's pointing away from the screen, then slide the MagLens switch to position the MagLens over the camera. • Be sure to only use the MagLens switch to move the MagLens to avoid accidentally smudging the camera lens or MagLens.
Guidelines for Charging With Micro-USB Cable Only charge this device using the included micro-USB cable connected to a computer or with the included adapter. Do not charge using a thirdparty adapter. Before use, inspect the cord to confirm that it is in good condition and that there are no breaks or exposed wires. Ensure there are no particles or liquid (water, juice, etc.) in either of the connectors before plugging in either end of the cable.
5. This toy contains batteries that are non-replaceable. 6. Do not leave the toy in extremely high temperatures such as close to fire or hot oven. 7. Keep the rubber cover of the micro-USB port closed tightly while it is not in use in order to prevent dust or water from getting into the microUSB port. Cleaning the KidiCom® Advance 3.0 Touch Screen • Slightly dampen a soft, lint-free cloth with a little water and wipe the screen to loosen dirt. • Use a clean and dry cloth to wipe the screen dry.
• The battery is recyclable, please follow your local recycling regulations. • This toy is only to be connected to equipment bearing either of the or following symbols: Avoid use in the following conditions: • Extreme high or low temperatures during use, storage or transportation. • Low air pressure at high altitude. • Disposal of the product into fire or a hot oven, or mechanically crushing or cutting the battery, which can result in an explosion.
Information for external power supplies: Trade Mark VTech® Comercial Registration Number 02178243 Address Napier Court, Abingdon Science Park, Abingdon, Oxon, OX14 3YT, U.K Model Identifier VT05EUK05100 Input voltage/AC frequency 100-240VAC 50-60Hz Output voltage 5VDC Output current 1A Output power 5W Average active power efficency 73.8% No load power consumption 0.
WARNING A very small percentage of the public, due to a pre-existing condition, may experience epileptic seizures or momentary loss of consciousness when viewing certain types of flashing colours or patterns, especially on screens. While the KidiCom® Advance 3.0 device does not contribute to any additional risks, we do recommend that parents supervise their children while they play video games.
Hereby, VTech® Electronics Europe PLC declares that the radio equipment type 5411 is in compliance with The Radio Equipment Regulations 2017 (2017 No.1206). The full text of the Declaration of conformity is available at the following internet address: www.vtech.com/re-directive Frequency Band: 2.4-2.483GHz, Maximum RF power: 50mW(17dBm) USB cable with ferrite must be used with this equipment to ensure compliance with the EMC Directive 2004/108/EC limits.
1. OWNERSHIP. The Software and Documentation (including all content contained within the Product) are owned by VTech®, or its licensors, and are protected by international copyright and other intellectual property laws. The Software and Documentation shall only be used by you in accordance with this Agreement. The Software and Documentation are licensed, not sold.
VTech® makes no warranties that the software is error free or is suitable for your purposes. VTech® makes no warranties other than those set forth above, and hereby disclaims all other warranties, whether express, implied or statutory, with respect to the software or documentation, including, without limitation, any implied warranties of merchantability, fitness for a particular purpose, or noninfringement.
CONSUMER SERVICES Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
Visit our website for more information about our products, downloads, resources and more. www.vtech.co.uk www.vtech.com.au TM & © 2021 VTech Holdings Limited. All rights reserved. Printed in China.
