User Guide
Table Of Contents
- Important safety instructions
- Instructions de sécurité importantes
- Parts check list
- Telephone layout
- Installation
- Set up
- Operation
- Appendix
- Technical specifications
EN - 34
Technical specifications
SIP 1-Line Hidden Base with Cordless Color Handset and Charger - CTM-S2116
SIP 1-Line Hidden Base - CTM-S2110
SIP 1-Line Cordless Color Handset and Charger - NGC-S3410HC
Frequency control Crystal controlled PLL synthesizer
Transmit frequency Handset: 1921.536-1928.448 MHz
Base Station: 1921.536-1928.448 MHz
Channels 5
Nominal effective range Maximum power allowed by FCC and IC. Actual operating range may vary
according to environmental conditions at the time of use.
Operating temperature 32–104 °F (0–40 °C)
Power requirement Handset battery (Model 5C): 3.7V 1200mAH, Li-ion
Handset charger: supplied power adapter: VT05EUS06045
Input: 100-240V AC 50/60 Hz Output: 6V DC @ 450mA
Base station: Power over Ethernet (PoE): IEEE 802.3at supported, class 2
If PoE not available, power adapter: S006AKU0500080
Input: 100-240V AC 50/60Hz Output: 5.0V DC @ 800mA
Message waiting signal SIP messaging RFC 3261
Speed Dial memory Handset: up to 4 memory locations; up to 32 digits
Ethernet network port Two 10/100 Mbps RJ-45 ports