User Guide

EN - 15
English
Handset Registration
Your cordless handset is preregistered to the
base station. You do not need to register your
cordless handset.
You can register additional cordless handsets
to the base station. The Base station
accommodates up to four CTM-S2116 or
CTM-S2115 cordless handsets.
1. On the base station, press the / FIND
HANDSET button for four seconds, then
release the button. Both LEDs on the base
station begin to flash.
2. On the cordless handset, Lang press the
key sequence: 7 5 6 0 0 #.
3. With Registration selected, press OK.
4. With Register Handset selected, press
Select.
The handset displays the message
"Press the WPS button on your Hub".
The handset displays "Registering handset".
5. Enter the PIN and press OK. The default PIN
is 1592.
6. The handset beeps and displays "Handset
registered"
Handset Deregistration
1. When a registered cordless handset is idle,
press key sequence: Lang 7 5 6 0 0 #.
2. With Registration selected, press OK.
3. Press or to select Deregister, and
then press Select.
4. Press or to select the handset you
want to deregister, and then press Select.
NOTE: The handset you are currently using
is indicated by **.
5. Enter the PIN and press OK. The default PIN
is 1592.
The handset beeps and displays "HANDSET
deregistered" .