Quick Start Guide

19
Handset Battery Charging
The battery must be fully charged before using the cordless handset for the first time. The
CHARGE LED turns on when the handset is charging on the telephone base, charging
base or charging stand. The battery is fully charged after 16 hours of continuous charging.
For best performance, keep the cordless handset in the telephone base, charging base or
charging stand when not in use.
Replacing a Cordless Handset Battery
The cordless handset battery is preinstalled. To replace the cordless handset battery,
follow the steps below.
1. Use a narrow object to pry open the screw cover and remove the screw with cross
head screwdriver. Then, insert a 5 mm standard flat head screwdriver in the provided
slot and gently open the handset cover.
2. Unplug the battery connector from the socket and then remove the battery from the
handset battery compartment.
3. Plug the battery connector securely into the socket inside the handset battery
compartment. Place the battery with the label THIS SIDE UP facing up and the wires
inside the battery compartment.
DRAFT