User's Manual

46
Telephone base installation
The telephone can be adapted to desktop use or mounted on a standard telephone wall plate.
Installation option - desktop position
Turn the telephone base over with the bottom side facing up.
Position the mounting bracket as shown. Insert the two small tabs of the mounting bracket into the lower slots on the telephone
base. Then press the large tab on the mounting bracket and firmly push it into the upper groove on the telephone base.
Install the telephone base as shown below. Then connect the coiled handset cord to the telephone base.
1.
2.
3.
Installation
SIP cordless 1-line/2-line deskset - CTM-S241P/CTM-S242P
Power jack
Power adapter
Electrical outlet not
controlled by a wall switch
Power cord