User's Manual
86
Adding and registering handsets/headsets/
speakerphones
Your telephone can support up to 12 DECT 6.0 cordless handsets,
headsets or speakerphones. You can purchase additional handsets
(AT&T model CL80119, sold separately) or up to 10 cordless
handsets and two cordless headsets or speakerphones (sold
separately). Visit
www.telephones.att.com/accessories
for a list of compatible DECT 6.0 cordless headsets or speakerphones.
Each new handset, headset or speakerphone must be registered to the
telephone base before use. You must register each handset, headset or
speakerphone separately.
To register a cordless headset or speakerphone to this telephone
system, please refer to the corresponding user’s manual for details.
To register a cordless handset, see below.
The handsets provided within your product box are already
registered as HANDSET 1, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up to
HANDSET 12).
Register a handset to the telephone base
1. Before you begin registration, make sure the handset is out of
the telephone base or charger and shows To register HS,
see manual.
2. Put the handset you wish to register on the telephone base
cradle.
3. The handset shows Registering... Please wait and the IN USE
light on the telephone base turns on. HANDSET X Registered
appears on the handset screen (HANDSET represents the
handset name, X represents the handset number). The handset
beeps and the IN USE¿¼º»ÇÇÈÅÁÆÂ滸»´Á·Æ¸Ç¼ÆÁÂÊ
registered with the telephone base.
Appendix
86