User's Manual

Smart call blocker
43
Call block settings
Control calls without numbers (Customized settings)
Use this setting to control “out of area” or “Private” calls. You can
choose to allow or reject these calls directly. You can also choose to
screen them with or without learning the callers’ names before you
decide whether to answer or reject these calls. Moreover, you can
forward these calls to the answering system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when the handset
is not in use. Press T
CID or SDIR to scroll to Smart call blk, then
press
MENU/SELECT.
2. Press T
CID or SDIR to scroll to ¬¸ÇÃŹ¼¿¸, then press MENU/SELECT.
3. Press T
CID or SDIR to scroll to Customise, then press MENU/SELECT.
4. Press
MENU/SELECT again to select Calls w/o num.
5. Press T
CID or SDIR to choose one of the following options, then
press
MENU/SELECT.
f Screening - ask the caller to press the pound key (#) or to
say his/her name before the call rings on your telephone.
f Allow - allow the calls to get through and ring.
f Answering sys - forward the calls to the answering system
without ringing.
f Block - reject the calls with block announcement.
6. If you select Screening, press T
CID or SDIR to choose one of the
following options, then press
MENU/SELECT.
f w/ Caller name - ask the caller to say his/her name before
the call rings on your telephone. You can then answer the
call, and hear the caller’s name announced. You can decide
whether to answer or reject the call, or to forward the call to
the answering system.
f w/o Caller name - ask the caller to press the pound key (#)
before the call rings on your telephone. You can then answer
the call.