User's Manual
Table Of Contents
- Introduction
- Getting Started
- Conference phone operation
- Phone Features
- Configuring the Phone
- Wireless Mic Registration
- WebUI
- Appendix
- Troubleshooting
- Precautions for users of implanted cardiac pacemakers
- About wireless mics
- Maintenance
- FCC, ACTA and IC regulations
- The RBRC® seal
- California Energy Commission battery charging testing instructions
- For C-ETL compliance only
- Mesures de sécurité importantes
- Limited warranty
- Technical specifications
41
Using the WebUI
Use an Internet browser to access the Web User Interface (WebUI) that resides on
the conference phone. After you log on to the WebUI, you can congure the following
features:
• Call Settings (See page 43)
• User Preferences (See page 45)
• Program Dial soft keys (See page 46)
• Speed Dial (See page 47)
• Local Directory (See page 48)
• Blacklist (See page 48)
• Call History (View only. You can click numbers that have hyperlinks to dial them.)
• User Password (See page 51)
The WebUI also has a Status page, where you can view status and information.
To access the WebUI:
1. Ensure that your computer is connected to the same network as your phone.
2. Find the IP address of your phone:
a. When the phone is idle, press MENU.
b. Press q to highlight Status, and then press SELECT.
The Status menu appears.
c. On the Status menu, ensure that Network is highlighted, and then press
SELECT.
The Network screen appears.
d. On the Network screen, note the IP Address.
3. On your computer, open an Internet browser. Depending on your browser, some of
the pages presented here may look different and have different controls.
4. Type the phone IP address in the browser address bar and press ENTER on
your computer keyboard.
A Login page appears.
5. Under User Name, enter user.
WebUI