User's Manual
Table Of Contents
- Introduction
- Getting Started
- Conference phone operation
- Phone Features
- Configuring the Phone
- Wireless Mic Registration
- WebUI
- Appendix
- Troubleshooting
- Precautions for users of implanted cardiac pacemakers
- About wireless mics
- Maintenance
- FCC, ACTA and IC regulations
- The RBRC® seal
- California Energy Commission battery charging testing instructions
- For C-ETL compliance only
- Mesures de sécurité importantes
- Limited warranty
- Technical specifications
24
To set Do Not Disturb:
1. From the Call menu, if necessary, press p or q to highlight Do Not Disturb.
2. Press SELECT.
3. On the Do Not Disturb menu, highlight the line for which you want to turn Do Not
Disturb On or Off.
4. When the desired line is highlighted, press t or u to turn Do Not Disturb On or
Off.
5. Press
Save
.
When Do Not Disturb is on, appears on the idle screen.
To set Call forward:
1. From the Call menu, press q to highlight Call forward.
2. Press SELECT.
The Call forward menu appears.
3. Highlight the line for which you want to congure call forward settings, and then
press SELECT.
4. On the next screen, press q to highlight the desired option:
• Call forward always
• Call forward busy
• Call forward no ans.
5. Press SELECT.
6. On the next screen, press t or u to turn call forwarding On or Off.
Phone Features