User's Manual
Table Of Contents
- Introduction
- Getting Started
- Conference phone operation
- Phone Features
- Configuring the Phone
- Wireless Mic Registration
- WebUI
- Appendix
- Troubleshooting
- Precautions for users of implanted cardiac pacemakers
- About wireless mics
- Maintenance
- FCC, ACTA and IC regulations
- The RBRC® seal
- California Energy Commission battery charging testing instructions
- For C-ETL compliance only
- Mesures de sécurité importantes
- Limited warranty
- Technical specifications
21
Conference phone operation
To locate wireless microphones:
1. Press MENU, and then highlight and select STATUS.
2. On the Status menu, highlight and select Wireless microphone.
3. On the Wireless microphone menu, press
Locate
.
The base unit screen displays Wireless microphones will ring. Press CANCEL/
Back to stop. All wireless mics that are not on the charging cradles play the location
tone for 30 seconds.
To mute the mic-location tone:
• On the base, press
Back
or CANCEL.
• On the wireless mic(s), press MUTE ALL, or put the mic(s) back onto the charging
cradle.