User's Manual

20
To view the Message menu:
1. When the phone is idle, press Menu.
2. With Features highlighted, press SELECT.
3. On the Features menu, press q to highlight Message, and then press SELECT.
The Message menu appears.
4. On the Message menu, highlight the desired line and then press SELECT.
Redialing
1. From the idle screen, press
Redial
.
The Dialed calls list appears.
2. Press the q or p navigation key to view the entry you want to dial.
3. While viewing the desired entry, press to dial the number.
Muting active calls
The mute function allows you to hear the other party but the other party cannot hear you.
• During a call, press MUTE ALL on the base unit or a wireless mic. The status
indicators turn red. All microphones in the system are muted until the mute function is
turned off.
• Press MUTE ALL on the base unit or a wireless mic to end mute all microphones
in the system. The status indicators turn green.
Temporarily silencing the ringer
When the base unit is ringing, you can temporarily silence the ringer of the base unit
without disconnecting the call. The next call rings normally at the preset volume.
To silence the ringer:
Press MUTE ALL on the base unit. The symbol appears.
Note: You can also press
or
on the base unit to adjust the ringer volume. The
adjustment will be saved and applied to the next incoming call.
Locating wireless microphones
This feature helps you nd any misplaced wireless mics within the range of the
base unit.
Conference phone operation