User's Manual

Appendix
42
Ener
gy-saving charging mode
When this mode is activ
ated, all telephone functions, except handset battery charging,
will be disabled.
To activate the energy-saving charging mode:
1. Unplug the t
elephone base power adapter from the power outlet. Make sure all handsets are
plugged with char
ged batteries before proceeding.
2. Whil
e you
pr
ess and hold
/HAND
SET LOCATOR, plug the telephone base power adapter
back to the power outlet.
3. A
fter about 20 seconds, when the
I
N USE light starts flashing, release
/
HANDSET LOCATOR
and then press it again within two seconds.
The process takes up to one minute to complete. When the phone successfully enters
the energy-saving charging mode, the IN USE light turns off and all handsets display
To register HS, see manual. You hear a confirmation tone.
When the phone fails to enter this mode, repeat the steps above.
N
ote: The telephone base will be powered up as normal if you fail to press
/
HANDSET LOCATOR
within two seconds in Step 3.
T
o deactivate the energy-saving charging mode:
1. Unplug the t
elephone base power adapter from the power outlet, then plug it back in.
The telephone base is powered up as normal.
2. R
egister the handsets back to the telephone base. See
page 34 f
or handset registration
instructions.
BC