User's Manual

Answering system
28
Answering system settings
Message alert tone
When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. By default, the
message alert tone is set to off.
There is no audible alert at the handset.
To change the setting:
1. When the handset is in idle mode, press MENU/SELECT to enter the main menu.
2. Press qCID or pDIR to scroll to >Answering sys, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.
4. Press qCID or pDIR to scroll to >Msg alert tone, then press
MENU/SELECT.
5. Press qCID or pDIR to choose >On or >Off.
6. Press MENU/SELECT to save the setting.
Message recording time
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
To change the setting:
When the handset is in idle mode, press MENU/
SELECT to enter the main menu.
Press q
CID or pDIR to scroll to >Answering sys, then press MENU/SELECT.
Press q
CID or pDIR to scroll to >Ans sys setup, then press MENU/SELECT.
Press q
CID or pDIR to scroll to >Recording time, then press MENU/SELECT.
Press q
CID or pDIR to choose >3 minutes, >2 minutes, or >1 minute, then
press MENU/SELECT to save the setting.
1.
2.
3.
4.
5.