User's Manual

16
Intercom
Use the intercom feature for conversations between two handsets. You can
buy extra accessory handsets (AT&T model CL80104) to expand your system.
Use a handset to initiate intercom calls and transfer calls.
1. Press MENU/
SELECT in idle mode to enter the main menu. Press qCID or
pDIR to scroll to >Intercom, then press MENU/SELECT.
If you have a two-handset system, your handset screen shows Calling
other handset.
If you have more than two handsets, your screen shows INTERCOM TO:
Press q
CID or pDIR to scroll to the desired handset and press
MENU/SELECT. Your handset screen shows Calling HANDSET X or
Calling all handsets.
The other handset(s) rings and shows Other handset is calling, HANDSET
X is calling, or HANDSET X is calling all (X represents the handset
number).
2. To answer the intercom call, press PHONE/FLASH, /SPEA�ERSPEA�ER or any
dialing key (0-9, TONE , or #) on any called handset.
3. To end the intercom call, one party presses OFF/CANCEL, or places the
handset back in the telephone base or charger. The other party hears four
beeps. Both handsets display Intercom ended.
•
•
Multiple handset use