User's Manual

Table Of Contents

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets, or a

handset and the telephone base. You can buy additional expansion handsets

(model AT&T CLP99003) for this telephone base to expand your telephone

system (up to 12 handsets).

Using a cordless handset:

1. Press MENU in idle mode to enter the main menu. Press

qCID or pDIR to scroll to Intercom, then press SELECT.

If you have one handset, the handset shows Calling base.

If you have more than one handset, the handset shows

INTERCOM TO: Use the dialing keys to eenter a specific

device number (0 for the telephone base, 1-9 for handsets

1-9, TONE followed by 0-2 for handsets 10-12, or

TONE followed by

for all devices), or press qCID or

pDIR to scroll to the desired device and press SELECT.

Your handset screen shows Calling HANDSET X,

Calling BASE 0 or Calling all.

The destination device(s) rings and shows HANDSET X is

calling or HANDSET X is calling all (HANDSET represents the handset

name, X represents the handset number).

2. To answer the intercom call, press HOME/FLASH, /SPEAKERSPEAKER or any

dialing key (0-9, TONE ) on the destination handset, or press HOME on

the telephone base. Both devices now show Intercom.

3. To end the intercom call, presses END, OFF/CANCEL, or places the

handset back in the telephone base or charger; or presses END on the

telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display

Intercom ended.

•

SELECT

Answering sys