User's Manual

Telephone operation
33
Make, answer and end a call
Make, answer or end a cell call
The CLP99183/CLP99283/CLP99353/CLP99383/CLP99483/CLP99553/
CLP99583 can be used to make or answer calls on the cell line. You can
connect a maximum of 2 Bluetooth enabled devices to the telephone base,
and both Bluetooth enabled devices can be used on a cell call at a time.
Using a cordless handset:
To make a cell call:
Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
Press HOME/FLASH or /SPEAKER, CELL 1, CELL 2 or any dialing
key (0-9 or TONE ).
To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger.
NOTES:
You can also use your cell phone to answer the call.
If you do not want to answer the call, press REJECT . The screen returns to the idle mode.
When you try to make a cell call but your cell phone is not connected to the base, the handset
displays Cellular phone not connected. Please connect to proceed. Press CONNECT to
connect your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 23 and Connect/disconnect an active device on page 24.
•
•
•
•
•
•