User's Manual

Telephone settings
Handset and telephone base settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse
(rotary) service, you must change the dial mode to pulse
dialing before using the telephone.
To set the dial mode:
1. Press MENU in idle mode to enter the main menu.
2. Press qCID or pDIR on the handset, or press qCALLER
ID or pDIRECTORY on the telephone base to scroll to
Settings, then press
SELECT.
3. Press qCID or pDIR on the handset, or press qCALLER ID
or pDIRECTORY on the telephone base to scroll to Dial
mode, then press SELECT.
4. Press qCID or pDIR on the handset, or press qCALLER
ID or pDIRECTORY on the telephone base to highlight
Touch-tone or Pulse, then press SELECT. There is
a confirmation tone and the screen returns to the
previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to Web address, then press
SELECT.
29
DIAL MODE
Touch-tone
Pulse
p
q
SELECT
BACK
SETTINGS
Key tone
CID time sync
Dial mode
SELECT
SETTINGS
Key tone
CID time sync
Dial mode
BACK S
BACK
DIAL MODE
>Touch-tone
Pulse
BACK
SELECT
p
q
SELECT
BACK