User's Manual

Telephone settings
Handset and telephone base settings
Ringer volume
You can set the ringer volume for incoming calls on all lines. When the ringer
volume for all calls (home and cellular is set to off, a steady ringer off icon
appears.
1. Press MENU in idle mode to enter the main menu.
2. Press qCID or pDIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Ringers,
then press SELECT.
3. Press SELECT again to select Ringer volume.
4. Press qCID or pDIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to sample each
volume level.
5. Press SET to save your preference. There is a confirmation tone
and the screen returns to the previous menu.
-OR-
Press qVOLUME p on the telephone base to set the
ringer volume while the telephone base is in idle mode
to set the ringer volume of the telephone base.
Press SET to confirm and you hear a confirmation tone.
NOTES:
Changing the handset ringer volume does not affect base
ringer volume.
If the ringer volume is set to off, that handset is silenced for all
incoming calls.
The ringer volume level also determines the ringer levels of intercom calls (page 63).
If the ringer volume is set to off, the caller ID will not be announced and the screen will briefly
display Caller ID won’t be announced.
1.
2.
•
•
•
•
RINGERS
Ringer volume
Ringer tone
p
q
SELECT
BACK
RINGER VOLUME
p
q
SELECT
BACK
RINGERS
Ringer volume
Ringer tone
BACK S
BACK
SELECT
RINGER VOLUME
BACK S
BACK
SELECT