User's Manual

Bluetooth
17
Bluetooth setup
Add a headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user’s
manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press qCID or pDIR to highlight Bluetooth, then press
SELECT.
3. Press SELECT to choose Add device.
4. Press SELECT to choose Add headset, then press
SELECT. The screen displays Please wait... followed by
If headset is connected to cell, please disconnect it.
5. Press NEXT. The screen displays Pls set headset to
discoverable mode. Set your headset to discoverable
mode (refer to the user’s manual of your headset), then
press NEXT.
6. The screen displays Searching for Bluetooth
headsets....
7. When the screen displays the found devices, press qCID
or pDIR to highlight your headset if necessary, then
press SELECT.
Enter the PIN of your headset if required. The PIN for
most Bluetooth devices is 0000 (refer to the user’s
manual of your headset), then
press NEXT.
8. When a device is successfully connected, the
corresponding status icon
( 2) displays and the CELL 2/HEADSET light on the
telephone base
turns on.
If you have trouble pairing your headset, it may not be compatible
with your CLP99183/CLP99283/CLP99353/CLP99383/CLP99483/
CLP99553/CLP99583. Check the Bluetooth compatibility list at
www.telephones.att.com.
•
Diretory
Caller ID log
Intercom
Bluetooth
p
q
SELECT
BACK
BLUETOOTH
Add device
Device list
Download dir
p
q
SELECT
BACK
ADD DEVICE
Add cellular
Add headset
p
q
BACK SELECT
Pls set headset
to discoverable
mode
NEXT
BACK
Searching for
Bluetooth
headsets...