User's Manual

Bluetooth
16
Bluetooth setup
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000.
7. Promptly turn on the Bluetooth feature of your cell phone and search for
or add new devices. Once your cell phone finds your AT&T phone (AT&T
DECT 6.0), press the appropriate key on your cell phone to continue the
pairing process.
Your cell phone may require a passcode. Enter the cell phone passcode
(typically 0000) into the telephone base and press SET.
Enter the PIN of the telephone base (the default PIN is 0000) into your
cell phone to continue the pairing process if required.
8. When a device is successfully connected, the corresponding status icon
( 1 or 2) displays. The corresponding device light on the telephone
base (CELL 1 or CELL 2/HEADSET) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your CLP99183/CLP99283/CLP99353/CLP99383/CLP99483/
CLP99553/CLP99583. Check the Bluetooth compatibility list at
www.telephones.att.com.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens,
follow the prompts on your cell phone and your CLP99183/CLP99283/CLP99353/
CLP99383/CLP99483/CLP99553/CLP99583 to complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
•
•
•
•
•